Our company has no existing products to sell, but we can produce and design products according to customers' needs. 1. Specializing in the production of injection molds, plastic accessories. 2. According to customer demand exact quotation. 3. We provide design services for the completion of the project. 4. Surface treatment: sliding screen, polishing, sandblasting, heat treatment, painting, powder spraying, anodizing, 5. Provide assembly service, assist to follow up outsourcing parts. 6. Plastic products: medical facilities, auto parts, sports equipment parts, home appliances parts, electronic equipment parts, agricultural plastic parts, industrial plastic parts, plastic toys, etc. 7. High-quality export of injection molding parts and moulds, while buying our products will also enjoy our superior after-sales service.
Injection pressure and speed are too low, barrel temperature and mold temperature are too low, resulting in premature cooling of the melt entering the mold, forming a weld. When the injection pressure and speed are too high, injection and melting will occur. Speed should be increased and back pressure increased to reduce the viscosity of plastics. Density increases. Plastic to dry well, recycled materials to use less, release agent dosage is too high or bad quality will also cause weld. Reduce clamping force and facilitate exhaust.
The sprue in the same cavity is too much, the sprue should be reduced or symmetrical. Or set as close to the weld as possible. The exhaust at the weld is poor, and the exhaust system should be set up. The gate is too large, the size of the pouring system is not appropriate, the gate should be opened as far as possible to avoid the melt flow around the insertion hole, or as few parts as possible. If the wall thickness changes too much, or the wall thickness is too thin, the wall thickness of the parts should be uniform. If necessary, a fusion well shall be opened at the fusion joint to separate the fusion joint components.
Plastics with poor fluidity or heat sensitivity should be appropriately added with lubricants and stabilizers. Plastic contains a lot of impurities, if necessary, should be replaced with good quality plastic. └─Plastic Injection Components
Suzhou Dongye Precision Molding Co.,Ltd.
- Company Name: Suzhou Dongye Precision Molding Co.,Ltd.
- Representative: Hanpan
- Product/Service: Injection Molded Parts , Injection Mold , Injection Molded Parts Assembly , Custom Molded Parts , Custom Injection Plastic Molding , Custom Plastic Parts
- Capital (Million US $): 3000000RMB
- Year Established: 2002
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 41% - 50%
- Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: Plant No. 4, No. 52, Jinqiao Industrial Park, Mudu Town, Suzhou City
- Contact Person: Mr. hanpan
- Tel: 86--18862398807
Premium Related Products